Analysis: Jindal Supreme (India) Limited

NSE:JSIPL

Growth thesis

Jindal Supreme (India) Limited is a Hisar-based integrated manufacturer of steel pipes, tubes and allied infrastructure products — black pipes, galvanised pipes, metal beam crash barriers and GI tubular poles — with about 171,000 tonnes of installed capacity, 53 dealers and no single customer contributing more than 5% of revenue. It entered FY27 as a newly listed company with a materially deleveraged balance sheet after using ₹99.89 crore of IPO proceeds to repay ₹71 crore of borrowings, cutting debt-to-equity to 0.4x from 1.2x in FY26 and 2.1x in FY24.

The investment case is a mix-led operating-leverage story rather than a volume-only expansion. Value-added products rose to 57.5% of mix from 49% YoY, which management identified as the main driver of margin improvement, and EBITDA per tonne nearly tripled to ₹5,800 in H1 FY27 from ₹2,100. Q2 FY27 revenue rose 36% YoY to ₹216.22 crore, EBITDA rose 122% to ₹16.94 crore (7.8% margin) and PAT rose 132% to ₹9.91 crore. H1 FY27 revenue was ₹407.16 crore (+23% YoY), EBITDA ₹30.70 crore (7.5% margin) and PAT ₹18.19 crore (4.5% margin). Management called it the strongest half-year performance so far.

The earnings path depends on two levers. First, utilisation: from 65.5% in H1 FY27, management guides about 70% in Q3 FY27, 75% in Q4 FY27 and 80%-plus by Q1 FY28, with fixed costs absorbed over higher volumes. Second, mix: value-added share is targeted at 70-75% and two new categories — nuts and bolts and ground-mounted solar structures — are targeted for Q4 FY27. On this basis management guides FY27 revenue of ₹850-900 crore and EBITDA of about ₹60 crore, with H1:H2 at roughly 40:60 and H2 stronger on added capacity. The double-digit EBITDA ambition is explicitly conditional on reaching 80% utilisation, and management describes the current 7-8% margin as the bottom case. These are management targets, not achieved results.

Milestones that should validate or break the case are dated. A crash-barrier line has already reached commercial operation, doubling capacity to 48,000 tonnes, and a new galvanising line added 18,000 tonnes (total 63,000 tonnes) with commercial production achieved in end-October. A fifth galvanising line of about 24,000 tonnes is planned, but management gave conflicting completion points — Q4 FY28 in prepared remarks versus about Q2 FY28 in Q&A — so the timing remains ambiguous. Total capacity is expected to reach about 200,000 tonnes, translating to 170,000-180,000 tonnes of output in FY28.

The larger structural change is the greenfield project at Raipur, Chhattisgarh. Management is in advanced stages of acquiring 75-80 acres, with due diligence underway and closure targeted in Q4. Phase 1 capex is about ₹150 crore for 150,000 tonnes, targeted for production by March 2028 and funded roughly 50:50 through internal accrual and debt, while full site potential is about ₹600 crore on land roughly four times Hisar. Phase 2 begins once the greenfield reaches 50% utilisation. If delivered, this would move the company from a single northern plant serving largely 20 states to a two-site operation with new sizes and an 11-12 state reach out of Raipur with lower freight.

Capital allocation supports the plan. The deleveraged balance sheet (0.4x debt-to-equity), ₹38.47 crore cash as at 30 September 2026 and management's indication of no planned equity dilution give headroom to fund growth without stressing borrowings. The main capital-allocation watch item is working capital: net working capital days rose to 64 from 57 in FY26 and H1 operating cash flow was negative on inventory build and higher receivables. Management targets a return to 45-50 days as inventory converts to sales in H2.

On management delivery, only one earnings call is available, so no multi-quarter record can be established; the capacity claims in the call are corroborated by reported utilisation data, but the forward commitments remain open. The clearest falsifiers are: (1) utilisation failing to progress toward 75-80%, which would stall the operating-leverage mechanism and defer the double-digit EBITDA target; (2) the Raipur land acquisition slipping or Phase 1 capex and March 2028 production not being met; (3) working capital staying elevated, keeping operating cash flow negative; and (4) the value-added mix failing to hold above 57%, removing the main margin driver.

In short, this is a business where the next 2-3 years hinge on a utilisation ramp and a mix shift already partly in place, backed by newly commissioned brownfield capacity and a funded greenfield option. The economics are credible but dependent on execution of the utilisation path and the Raipur project; the capital-allocation setup is stronger than the demand visibility, since sales are largely day-to-day with no meaningful order book.

Why is Jindal Supreme (India) Limited stock rising?

  • Value-added products rose to 57.5% of mix from 49% YoY, and EBITDA per tonne nearly tripled to ₹5,800 in H1 FY27 from ₹2,100. Management identified the mix shift as the main driver of margin improvement.
  • A crash-barrier line reached commercial operation, doubling capacity to 48,000 tonnes, and a new galvanising line added 18,000 tonnes (total 63,000 tonnes) with commercial production achieved. Management expects enhanced volumes from the next month and names crash barriers and tubular poles as the H2 growth drivers.
  • With utilisation at 65%, management guides to 75% in Q4 FY27 and 80%-plus by Q1 FY28, noting fixed costs stay flat while variable costs fluctuate. It describes 7-8% EBITDA margin as the bottom case and targets double-digit EBITDA once utilisation reaches 80%.
  • IPO proceeds of ₹99.89 crore cut borrowings by ₹71 crore, taking debt-to-equity to 0.4x from 1.2x in FY26 and 2.1x in FY24, with ₹38.47 crore cash. Management says it has headroom to invest without stressing the balance sheet and indicated no planned equity dilution.
  • Phase 1 at Raipur is about ₹150 crore for 150,000 tonnes, production targeted by March 2028, on 75-80 acres with about ₹600 crore full-site potential. Management expects reach across 11-12 states, lower freight and some new, larger sizes.

Research report

Jindal Supreme (India) Limited is an integrated manufacturer of steel pipes, tubes and allied infrastructure products operating from a 16-acre facility in Hisar, Haryana. The company, with a legacy dating to 1974 (formerly Jena Steel Tubes Limited), markets four main product categories: black pipes, galvanised pipes, metal beam crash barriers and GI tubular poles. Installed capacity is about 171,000 tonnes per annum, sold through 53 dealers and direct institutional buyers across more than eight ...

Read the full report →

Growth guidance

Management guided FY27 revenue of ₹850-900 crore and EBITDA of about ₹60 crore, with H1:H2 at roughly 40:60. It targets overall capacity utilisation of about 70% in Q3 FY27, 75% in Q4 FY27 and 80%-plus by Q1 FY28, a value-added mix of 70-75%, and a working capital cycle back to 45-50 days. 7-8% EBITDA margin is described as the bottom case, with double-digit EBITDA targeted once utilisation reaches 80%. It targets solar-structure and nuts-and-bolts production by Q4 FY27 and 80-85% utilisation of GI tubular poles by Q4 FY27. No planned equity dilution was indicated.

Get valuation models, detailed research reports, thematic primers, risk analysis, growth triggers, bear case, capex tracker, walk the talk, and more for Jindal Supreme (India) Limited and 4,900+ companies.

Sign in
5-day free pass. No card required.